<Custom made>
MANIFOLD WITH VARIOUS SIZES OF VALVE MOUNTABLE

MFU-A05・12R
Both A12 and A05 valves are mountable on a single A12 manifold.

MFU-A12・20R
Both A20 and A12 valves are mountable on a single A20 manifold.
<Reference dimensions>


MFC-A00S・05P
Both A05P and A00S valves are mountable on a A05 single manifold
<Reference dimensions>


MANIFOLD WITH BUILT-IN STOP VALVE
MFC-A00S・05P

Manifold with stop valve which controls supply air from common port P to each valve.

During maintenance, you can replace only wrong valves without stopping air supply to other valves.

<Reference dimensions>


FLOW RATE ADJUSTING UNIT
MFS-A00S

This manifold shares a common exhaust port with variable throttle valve built in the exhaust port of each valve.

Flow rate can be gradually adjusted by operating several valves together.

<Reference dimensions>

10-station at MAX.

<Air circuit>



BOTTOM WIRING MANIFOLD
MFB-A12G

P・R・A・B ports are wired on the bottom of the manifold.

Only A・B ports can be wired on the bottom.
<Reference dimensions>

INDIVIDUAL EXHAUST SPACER
A05P・A05R・A12P spacers are added to a line up.
A20PA-1E-01

Individual exhaust spacer for A20P
<Reference dimensions>



(Note)

The mounting height of individual exhaust spacer : 20mm

R2 port shown in the drawing should be mounted on the side of end cover.

Be sure that the exhaust ports on the side of pilot part should be piped so that drain should not drop on wiring.



A00¡şM5 SUB-BASE TYPE
2-PORT VALVE MODEL
A00SC23-¡°¡°-M5-E

This valve is two-port type of A00 valve. The port size of sub-base is M5.
<Reference dimensions>


<JIS mark>